Aller au contenu principal

Introduction

This is a guide to show how to remove and replace the wiring harness from the stereo. The wiring harness is how the device is connected to the vehicle deck.

Before any repair work can be done one must remove the device for the vehicle. To do so follow this link to see a general vehicle removal of a stereo system.

  1. Locate the clip on the wiring harness.
    • Locate the clip on the wiring harness.

  2. Press down on the clip like you would an Ethernet cable. Rock harness side to side, pulling gently towards you until harness detaches.
    • Press down on the clip like you would an Ethernet cable.

    • Rock harness side to side, pulling gently towards you until harness detaches.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Odelkys Marquez

Membre depuis le 22/09/2014

1 022 Réputation

7 tutoriels rédigés

Équipe

USF Tampa, Team 10-2, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 10-2, Brown Fall 2014

USFT-BROWN-F14S10G2

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,794