Aller au contenu principal
  1. Remove screws from down Remove screws from sides Gently take out the from of deck from metal base.
    • Remove screws from down

    • Remove screws from sides

    • Gently take out the from of deck from metal base.

  2. Remove left side black wire Remove white contact strips
    • Remove left side black wire

    • Remove white contact strips

    • Remove little screw to change ruble inside deck mechanims

    • Remove power supply grey wires

  3. Remove the small screw Then you can see the place of the weel. Change the ruble.
    • Remove the small screw

    • Then you can see the place of the weel. Change the ruble.

  4. Replace the big belt. Replace the small (green) belt.
    • Replace the big belt.

    • Replace the small (green) belt.

    • Use a little tape to old the belt. When closing remove the tape.

  5. Insert little screw and close the deck with new belts. Plug all the wires and strips.
    • Insert little screw and close the deck with new belts.

    • Plug all the wires and strips.

    • Close everything, and your done

    • Hope it help, please leave a comment.

Conclusion

To reassemble your device, follow these isntructions in reverse order

Merci à ces traducteurs :

100%

jeremyfitz nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Cafony

Membre depuis le 17/02/2015

275 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 12

Total : 54