Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 1.5mm screws (one on the right and one on the left side) on the screen portion of the device with a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 1.5mm screws on the bottom of the screen module with a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the plastic wrapping on the side of the top portion of the device. This is done by first sliding the wrapping up to disengage the plastic hooks, then peeling the plastic away starting from either end.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove four 2.0mm screws on the side of the screen portion of the device with a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove top .75mm screw of the top portion of device with a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove front panel from the screen. You should be able to do this by gently pulling the pieces apart with your hands
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry the screen from the back panel using the plastic opening tools to remove the screen module.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the tape from the wires on the back side of the screen module.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the screen from the device by gently pulling the two display data cables away from the bottom of the screen module with your fingers.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.