Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.
-
Remove the back panel by lifting it away with your hands.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use tweezers to unplug the speaker wire from the motherboard by pulling the plug (not the wires) down towards the speaker.
-
Remove the tape holding speaker wire by peeling it away.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Holding down the speaker rail unscrew the two 2.5mm screws with a Phillips #00 screwdriver.
-
Remove the speaker rail vertically from the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Hold back the plastic tabs to pop the speaker out of the rail.
-