Pièces

Aucune pièce nécessaire.

  1. Remove the six screws holding the case together.
    • Remove the six screws holding the case together.

  2. Remove the seven screws holding the motherboard to the device.
    • Remove the seven screws holding the motherboard to the device.

    • Unclip the battery harness power cable from the motherboard.

    • Unclip the scroll wheel power cable from the motherboard.

    • Pull the left clip to remove the cable.

    • Pull out the two clips from the center to remove the power cable.

    • Rotate the motherboard toward you to show the cables on the opposite side of the motherboard.

    • Extend both sides of the left clip to remove the power cable.

    • Pull out the center clip to remove the power cable.

    • Pull the right clip out to remove the right cable.

    • The motherboard is removed. To install the new motherboard, follow the directions in reverse.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Emily

Membre depuis le 18/10/2011

1 Réputation

3 tutoriels rédigés

Équipe

James Madison, Team 1-4, Allen Fall 2011 Membre de l'équipe James Madison, Team 1-4, Allen Fall 2011

JMU-ALLEN-F11S1G4

3 membres

4 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 1,055