Introduction

Keeping the back panel in good condition is key to extending the lifetime of the camera.

Pièces

Aucune pièce nécessaire.

Power down the camera and remove the batteries.
  • Power down the camera and remove the batteries.

Ajouter un commentaire

Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.
  • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

  • There are six 5.22mm long, 3.00mm head diameter screws total.

  • The left side is not shown but there should be 1 screw on that side.

Ajouter un commentaire

  • Remove the back casing.

  • The casing itself is sturdy so don't be afraid to remove it forcefully.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Trystan Jasperson

Membre depuis le 17/03/2018

231 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S5-G4, Williams Spring 2018 Membre de l'équipe Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 51