Aller au contenu principal
  1. Cette étape n’est pas traduite. Aidez à la traduire

    Slide the lock at the bottom of the camera to "Open".
    • Slide the lock at the bottom of the camera to "Open".

    • The door to the battery pack is spring loaded.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    Slide the blue clip up and away from the battery.
    • Slide the blue clip up and away from the battery.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    Remove the battery.
    • Remove the battery.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    Remove the six 3.5mm Phillips #000 screws. Rotate the lock away from the camera. Rotate the lock away from the camera.
    • Remove the six 3.5mm Phillips #000 screws.

    • Rotate the lock away from the camera.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    Pry the device open with the plastic opening tool. There are two clips that help prevent the front panel from separating. There are two clips that help prevent the front panel from separating.
    • Pry the device open with the plastic opening tool.

    • There are two clips that help prevent the front panel from separating.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    Remove the two plastic spacers between the front and the back panels. The spacers may fall out when removing the panels. Carefully remove the back panel.
    • Remove the two plastic spacers between the front and the back panels.

    • The spacers may fall out when removing the panels.

    • Carefully remove the back panel.

  7. Cette étape n’est pas traduite. Aidez à la traduire

    Gently release the button board from the clips. Be careful when lifting the button board; the ribbon cable will still be attached.
    • Gently release the button board from the clips.

    • Be careful when lifting the button board; the ribbon cable will still be attached.

  8. Cette étape n’est pas traduite. Aidez à la traduire

    Disconnect the no-fuss ribbon cable by gently pulling it out of the  button board. Disconnect the no-fuss ribbon cable by gently pulling it out of the  button board.
    • Disconnect the no-fuss ribbon cable by gently pulling it out of the button board.

  9. Cette étape n’est pas traduite. Aidez à la traduire

    Push the bottom right corner of the LCD screen out and slide it to the right to release it from the clips. Be careful when lifting the LCD screen; the ribbon cable will still be attached.
    • Push the bottom right corner of the LCD screen out and slide it to the right to release it from the clips.

    • Be careful when lifting the LCD screen; the ribbon cable will still be attached.

  10. Cette étape n’est pas traduite. Aidez à la traduire

    Grasp the no-fuss ribbon cable and gently pull it out from the motherboard. Grasp the no-fuss ribbon cable and gently pull it out from the motherboard.
    • Grasp the no-fuss ribbon cable and gently pull it out from the motherboard.

Ligne d'arrivée

4 autres ont terminé cette réparation.

Addyson Salalila

Membre depuis le 15/09/2016

291 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 17-1, Blackwell Fall 2016 Membre de l'équipe USF Tampa, Team 17-1, Blackwell Fall 2016

USFT-BLACKWELL-F16S17G1

4 membres

6 tutoriels rédigés

5 commentaires

hii

plaz help me

tajbhatnagar - Réponse

Sony Cyber-Shot DSC-W830 LCD ……WowObjects LCD Display Screen For SONY DSC-W150 same hai ya different hai

tajbhatnagar - Réponse

Hi I need a one DSC w810 display how much. ?

How can contact you ?

Tamil Varshitha - Réponse

Sony dsc s2000 model camera need

Display & lens unit

Tamil Varshitha - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 24

Total : 2,856