Introduction

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

Pièces

Aucune pièce nécessaire.

Remove the 6mm Phillips #000 screws.
  • Remove the 6mm Phillips #000 screws.

Ajouter un commentaire

Remove the five 6mm Phillips #000 screws.
  • Remove the five 6mm Phillips #000 screws.

  • Remove the four 3mm Phillips #000 screws.

Ajouter un commentaire

  • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christian Morales

Membre depuis le 14/02/2018

97 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S1-G6, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 31

Total : 97