Aller au contenu principal

Introduction

This guide gives a simple step-by-step process for removing and/or replacing the battery. Battery removal is required for most other repairs of this device.

  1. Make sure the surface you place the screen on is clean of debris and dust.  Otherwise you risk scratching your screen.
    • Make sure the surface you place the screen on is clean of debris and dust. Otherwise you risk scratching your screen.

    • Place the camera with the bottom facing you and the lens facing up.

  2. Push down and away from the camera to the left on the indicated indentation in the battery cover.  The compartment should slide open as shown.
    • Push down and away from the camera to the left on the indicated indentation in the battery cover. The compartment should slide open as shown.

  3. Push the blue tab towards the camera body to the right, while simultaneously pulling out the battery. The battery is not shown here.  However, normally the battery would be in the displayed compartment.
    • Push the blue tab towards the camera body to the right, while simultaneously pulling out the battery.

    • The battery is not shown here. However, normally the battery would be in the displayed compartment.

Conclusion

To reassemble your device, insert the new battery in the compartment, making sure that your battery has the correct orientation, then follow these instructions in reverse order.

Brianna Greenlaw

Membre depuis le 06/04/2015

1 060 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-3, Forte Spring 2015 Membre de l'équipe Cal Poly, Team 17-3, Forte Spring 2015

CPSU-FORTE-S15S17G3

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 9

Total : 912