1. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

    Ajouter un commentaire

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

    Ajouter un commentaire

    • Using a spudger, carefully pry open the front casing.

    Ajouter un commentaire

    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

    Ajouter un commentaire

    • It is necessary to first locate the appropriate screws in order to disassemble the back casing.

    Ajouter un commentaire

    • Remove the found screws with a small screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

    Ajouter un commentaire

    • Carefully pull the back casing away from the camera.

    Ajouter un commentaire

    • The back casing is now removed from the camera.

    Ajouter un commentaire

    • Remove the two screws on the back side of the camera surrounding the LCD screen.

    Ajouter un commentaire

    • Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.

    • Carefully pull the lens away front the camera until it is released.

    Ajouter un commentaire

    • The lens is now successfully removed from the camera.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Katie McCraw

Membre depuis le 09/03/2012

191 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 1-5, Benson Spring 2012 Membre de l'équipe Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 membres

7 tutoriels rédigés

Is there a way to disassemble the lens to correct the alignment. My daughter dropped it and I think the mechanism has been misaligned.

Macjune Tolentino - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 2,227