Aller au contenu principal

Introduction

This is a step by step guide to uninstalling the front casing of the camera.

Pièces

Aucune pièce spécifiée.

  1. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Using a spudger, carefully pry open the front casing.
    • Using a spudger, carefully pry open the front casing.

  5. Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Membre depuis le 09/03/2012

191 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 1-5, Benson Spring 2012 Membre de l'équipe Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,101