Réparez vos affaires Communauté Boutique

Sony Cyber-shot DSC-P52 Shutter Motor Replacement

Introduction

This guide explains how to remove and replace the shutter motor in the Sony Cybershot DSC-P52

Ce dont vous avez besoin

  1. Sony Cyber-shot DSC-P52 Shutter Motor Replacement, Outer Case: étape 1, image 1 de 1

    • Open the battery compartment and remove the batteries.

    • Remove all of the visible screws on the outside of the case.

    • There should be three of them that are all easily located.

    Traduire

  2. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 2, image 1 de 1

    • Open the memory card compartment.

    • Remove the screw next to the memory card slot.

    Traduire

  3. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 3, image 1 de 1

    • Pull apart the front and back cover pieces carefully.

    • The front cover should come completely free with little effort.

    • The back cover will still be attached to the circuit board.

    Traduire

  4. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 4, image 1 de 1

    • Simultaneously unclip all of the clips holding in the circuitry. Remove the back case.

    • The circuitry will still be connected to the back case by ribbon cables.

    Traduire

  6. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 5, image 1 de 1

    • Open the case as shown.

    Traduire

  7. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 6, image 1 de 1

    • Unclip the clip holding the ribbon cable in.

    • Other ribbon cables might not have a clips.

    Traduire

  8. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 7, image 1 de 1

    • Pull the ribbon cable out.

    Traduire

  9. Sony Cyber-shot DSC-P52 Shutter Motor Replacement, Motherboard Assembly: étape 8, image 1 de 1

    • Remove all six screws on the front side of the motherboard circled in the picture.

    • Pull the motherboard from the rest of the housing.

    • It will still be connected to the flash unit.

    Traduire

  10. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 9, image 1 de 1

    • Remove the cable on the back side of the motherboard.

    Traduire

  11. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 10, image 1 de 1

    • Detach the ribbon cables shown.

    • Careful! Touching the leads of the large yellow capacitor can result in a painful shock.

    • Remove the flash unit from the motherboard.

    Traduire

  12. Sony Cyber-shot DSC-P52 Shutter Motor Replacement, Shutter Motor: étape 11, image 1 de 1

    • Remove screw securing motor and mount in place.

    • Be careful to leave shutter gears in the correct position

    Traduire

  13. Sony Cyber-shot DSC-P52 Shutter Motor Replacement: étape 12, image 1 de 1

    • Remove the two screws holding motor to mount/gears.

    • Remove the motor from the mount.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Greg Hermansen

Membre depuis le 01/28/11

25 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 3-43, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-43, Regan Winter 2011

CPSU-REGAN-W11S3G43

4 membres

20 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 20

Total : 4,914