Réparez vos affaires Communauté Boutique

Sony Cyber-shot DSC-P9 Flash Replacement

Ce dont vous avez besoin

  1. Sony Cyber-shot DSC-P9 Flash Replacement, Battery: étape 1, image 1 de 1

    • Slide the battery latch down the side of the camera with your hands.

    • The latch will automatically pop open.

    Modifier

  2. Sony Cyber-shot DSC-P9 Flash Replacement: étape 2, image 1 de 1

    • Unlatch the clip over the battery.

    • The battery will partially pop out.

    Modifier

  3. Sony Cyber-shot DSC-P9 Flash Replacement: étape 3, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 3, image 2 de 2

    • Remove the battery from the camera.

    Modifier

  4. Sony Cyber-shot DSC-P9 Flash Replacement, Outer Casing: étape 4, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement, Outer Casing: étape 4, image 2 de 2

    • Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.

    • Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.

    Modifier

  5. Sony Cyber-shot DSC-P9 Flash Replacement: étape 5, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 5, image 2 de 2

    • Once the screws are removed, slowly remove the back casing from the rest of the camera.

    Modifier

  6. Sony Cyber-shot DSC-P9 Flash Replacement: étape 6, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 6, image 2 de 2

    • Then, pull the front case away from the rest of the camera.

    Modifier

  7. Sony Cyber-shot DSC-P9 Flash Replacement: étape 7, image 1 de 1

    • After the casing is removed, the camera should look as shown.

    Modifier

  9. Sony Cyber-shot DSC-P9 Flash Replacement, Lens: étape 8, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement, Lens: étape 8, image 2 de 2

    • Dislodge the round casing from the lens.

    • Pull it away from the rest of the camera.

    Modifier

  10. Sony Cyber-shot DSC-P9 Flash Replacement: étape 9, image 1 de 1

    • Unscrew the two 4.0mm Phillips #000 screws from the display.

    Modifier

  11. Sony Cyber-shot DSC-P9 Flash Replacement: étape 10, image 1 de 1

    • Pull the two ribbon cables out of their slots on the back circuit board.

    Modifier

  12. Sony Cyber-shot DSC-P9 Flash Replacement: étape 11, image 1 de 1

    • Remove the three 4.0mm Phillips #000 screws holding the back panel in place.

    Modifier

  13. Sony Cyber-shot DSC-P9 Flash Replacement: étape 12, image 1 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 12, image 2 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 12, image 3 de 3

    • Work the back panel out from under the small grey clip.

    • Slide the back panel off of the camera by dislodging it from the remaining clips.

    • Below is a flat, orange cable connecting the lens to the motherboard.

    • Be careful not to bend the back plate during this process.

    Modifier

  14. Sony Cyber-shot DSC-P9 Flash Replacement: étape 13, image 1 de 1

    • Turn the camera over so that you can see the front of the lens.

    • Two connectors link the lens to the motherboard.

    • Gently bring the lens away from the camera.

    Modifier

  15. Sony Cyber-shot DSC-P9 Flash Replacement: étape 14, image 1 de 1

    • Using the flat end of the plastic spudger tool, flip up the black tabs on the connectors.

    • Be careful not to exert too much force, as the connectors are delicate.

    Modifier

  16. Sony Cyber-shot DSC-P9 Flash Replacement: étape 15, image 1 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 15, image 2 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 15, image 3 de 3

    • Gently pull out the cables and move the lens away from the rest of the camera.

    • You should now have two distinct, separate components.

    Modifier

  17. Sony Cyber-shot DSC-P9 Flash Replacement, Flash: étape 16, image 1 de 1

    • Remove the 3.0mm Phillips #000 screw at the top of the battery door.

    Modifier

  18. Sony Cyber-shot DSC-P9 Flash Replacement: étape 17, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 17, image 2 de 2

    • Pull off the top button piece. You will have to detach a small blue ribbon cable.

    Modifier

  19. Sony Cyber-shot DSC-P9 Flash Replacement: étape 18, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 18, image 2 de 2

    • Caution: the capacitor, a black cylinder near the top of the camera, might have a charge in it, which could be harmful to you or the camera. Neutralize it by touching both wires with a screwdriver at the same time.

    Modifier

  20. Sony Cyber-shot DSC-P9 Flash Replacement: étape 19, image 1 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 19, image 2 de 3 Sony Cyber-shot DSC-P9 Flash Replacement: étape 19, image 3 de 3

    • Remove the flash mechanism. It is held in place by a clip on the side of the camera.

    • The capacitor and flash will rotate out, still attached by a ribbon cable on the left.

    Modifier

  21. Sony Cyber-shot DSC-P9 Flash Replacement: étape 20, image 1 de 2 Sony Cyber-shot DSC-P9 Flash Replacement: étape 20, image 2 de 2

    • Lift up the black tab with the spudger.

    • Gently remove the ribbon cable from the rest of the camera.

    • The flash component is now completely separate from the rest of the camera.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Andrew Forster

Membre depuis le 04/16/12

12 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 17-25, Amido Spring 2012 Membre de l'équipe Cal Poly, Team 17-25, Amido Spring 2012

CPSU-AMIDO-S12S17G25

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 698