Aller au contenu principal

Sony Cyber-shot DSC-W5 LCD Screen Replacement

Ce dont vous avez besoin

  1. Sony Cyber-shot DSC-W5 LCD Screen Replacement, Back Cover: étape 1, image 1 de 1
    • Remove Memory Stick Pro from the card reader slot on the bottom of the camera.

    • Remove both batteries.

  2. Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 2, image 1 de 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 2, image 2 de 2
    • Remove the single visible screw from both sides of the camera.

    • Remove the two screws that are adjacent to the warning label, which is on the underside of the camera.

    • Do NOT remove all four screws from the bottom.

  3. Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 3, image 1 de 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 3, image 2 de 2
    • Gently remove the back cover from the camera.

    • The first time the case is removed, it will be stiff. Be patient and gently rock the cover back and forth until it slides free.

  4. Sony Cyber-shot DSC-W5 LCD Screen Replacement, LCD Screen: étape 4, image 1 de 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement, LCD Screen: étape 4, image 2 de 2
    • Remove the two screws holding the circuit board down.

  5. Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 5, image 1 de 1
    • Detach the orange cable from the board.

    • Use a thin object, like a paperclip, to gently pry the cable off the connector.

  6. Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 6, image 1 de 2 Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 6, image 2 de 2
    • The LCD screen sits in two slots; one on the bottom, and one on the left edge.

    • Slide LCD screen from the two slots.

    • Do not attempt to completely remove the screen, as it is still attached to the camera.

  7. Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 7, image 1 de 3 Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 7, image 2 de 3 Sony Cyber-shot DSC-W5 LCD Screen Replacement: étape 7, image 3 de 3
    • To remove the LCD screen, detach the orange cable from the board.

    • If needed, replace the LCD screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Thomas

Membre depuis le 04/14/10

133 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 15-50, Garner Spring 2010 Membre de l'équipe Cal Poly, Team 15-50, Garner Spring 2010

CPSU-GARNER-S10S15G50

5 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 14

Total : 11,340