Introduction

Disassembling the back cover of the camera so that we can repair components from the inside.

Pièces

Aucune pièce nécessaire.

Slide the battery cover in the direction the arrow points.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

Ajouter un commentaire

Flick the blue switch for the battery to pop out.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

Ajouter un commentaire

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

Ajouter un commentaire

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

Ajouter un commentaire

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Ajouter un commentaire

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

kkfong91

Membre depuis le 11/10/2010

293 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 9-20, Regan Fall 2010 Membre de l'équipe Cal Poly, Team 9-20, Regan Fall 2010

CPSU-REGAN-F10S9G20

5 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 3,241