Aller au contenu principal

Sony DCR-DVD 108 LCD Screen Replacement

Ce dont vous avez besoin

  1. Sony DCR-DVD 108 LCD Screen Replacement, LCD Screen: étape 1, image 1 de 1
    • Remove the front facing screw adjacent to the LCD screen using a J1 Phillips screwdriver. The screw is 2.8 mm in length.

  2. Sony DCR-DVD 108 LCD Screen Replacement: étape 2, image 1 de 1
    • Rotate the camera screen until the screw on the bottom is clearly visible, then unscrew with a Phillips #1 screwdriver. This screw is 2.8mm in length.

  3. Sony DCR-DVD 108 LCD Screen Replacement: étape 3, image 1 de 1
    • Rotate camera again to find #1 Phillips head screw, the screw length is about 2.8 mm long. A J1 screwdriver is advised.

  4. Sony DCR-DVD 108 LCD Screen Replacement: étape 4, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Slowly pry apart the covers using a plastic spudger.

    • Be sure to disconnect the ZIF connector holding the ribbon cable in place. To do this, use a spudger to flip the black tab up, and pull the cable out with tweezers.

    • This photo shows a torn ribbon cable. Be sure to disconnect the ribbon cable before fully removing the LCD cover, to avoid damage to the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elijah DeWolf

Membre depuis le 02/09/16

577 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 7-6, Cheng Spring 2016 Membre de l'équipe USF Tampa, Team 7-6, Cheng Spring 2016

USFT-CHENG-S16S7G6

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 39

Total : 713