Aller au contenu principal

Sony DVP-FX730 Laser Replacement

Ce dont vous avez besoin

  1. Sony DVP-FX730 Laser Replacement, Cover: étape 1, image 1 de 1
    • Remove the five exposed 7.9 mm screws using a Phillips screwdriver.

    • Punch through the warranty sticker with the spudger.

    • Remove the screw underneath with the Phillips screwdriver.

  2. Sony DVP-FX730 Laser Replacement: étape 2, image 1 de 1
    • Remove the rubber feet using the spudger.

    • Remove the screws that were covered by the rubber feet.

  3. Sony DVP-FX730 Laser Replacement: étape 3, image 1 de 1
    • Hold on to the corners of the cover and gently lift the cover.

    • The tray is still connected to the base with wires.

  4. Sony DVP-FX730 Laser Replacement: étape 4, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Gently remove the wires with tweezers by pulling up on the base they are attached to.

  5. Sony DVP-FX730 Laser Replacement, Laser: étape 5, image 1 de 2 Sony DVP-FX730 Laser Replacement, Laser: étape 5, image 2 de 2
    • Remove the large connector.

    • Remove the small connector.

  6. Sony DVP-FX730 Laser Replacement: étape 6, image 1 de 1
    • Remove Philips screws with the #0 Philips Screwdriver.

  7. Sony DVP-FX730 Laser Replacement: étape 7, image 1 de 1
    • Lift up the black piece connected to the wires.

    • Lift gently because the ribbon cable is attached to the bottom.

  8. Sony DVP-FX730 Laser Replacement: étape 8, image 1 de 2 Sony DVP-FX730 Laser Replacement: étape 8, image 2 de 2
    • Unlock the lock clip

  9. Sony DVP-FX730 Laser Replacement: étape 9, image 1 de 1
    • Remove the T6 screws with the T6 screwdriver.

  10. Sony DVP-FX730 Laser Replacement: étape 10, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Gently pull the rods out with tweezers.

    • Be sure the laser is out of the way so that the rods can be removed.

  11. Sony DVP-FX730 Laser Replacement: étape 11, image 1 de 2 Sony DVP-FX730 Laser Replacement: étape 11, image 2 de 2
    • Pull laser off of the rods.

    • Be careful when removing the rods because a fragile metal piece may break.

  12. Sony DVP-FX730 Laser Replacement: étape 12, image 1 de 1
    • The laser is now removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Oliver Woolsoncroft

Membre depuis le 01/20/12

78 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 11-21, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 11-21, Maness Winter 2012

CPSU-MANESS-W12S11G21

4 membres

5 tutoriels rédigés

Un commentaire

where do I buy the lens?

mnmmacd - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 4,751