Réparez vos affaires Communauté Boutique

Sony DVP-NS325 Power Supply Board Replacement

Introduction

The power cable motherboard is what is used to distribute power to the DVD player and is the primary source of power for the DVD player. It is a vital part of the DVD player providing power to all systems.

Ce dont vous avez besoin

  1. Sony DVP-NS325 Power Supply Board Replacement, Outer Case: étape 1, image 1 de 3 Sony DVP-NS325 Power Supply Board Replacement, Outer Case: étape 1, image 2 de 3 Sony DVP-NS325 Power Supply Board Replacement, Outer Case: étape 1, image 3 de 3

    • Use a Phillips screwdriver to unscrew the five screws.

    Modifier

  2. Sony DVP-NS325 Power Supply Board Replacement: étape 2, image 1 de 3 Sony DVP-NS325 Power Supply Board Replacement: étape 2, image 2 de 3 Sony DVP-NS325 Power Supply Board Replacement: étape 2, image 3 de 3

    • Use the Philips screwdriver to remove the screws located on the sides and the back.

    • Not shown are the right side screw and the middle screw.

    Modifier

  3. Sony DVP-NS325 Power Supply Board Replacement: étape 3, image 1 de 1

    • Use a spudger to separate the case from the chassis.

    • Remove the case.

    Modifier

  4. Sony DVP-NS325 Power Supply Board Replacement, Power Cable: étape 4, image 1 de 2 Sony DVP-NS325 Power Supply Board Replacement, Power Cable: étape 4, image 2 de 2

    • Unscrew all screws using a Phillips screwdriver removing the outer case to access the power cable.

    Modifier

  6. Sony DVP-NS325 Power Supply Board Replacement: étape 5, image 1 de 2 Sony DVP-NS325 Power Supply Board Replacement: étape 5, image 2 de 2

    • Using a finger, press down on the clip to remove the connector for the cable.

    Modifier

  7. Sony DVP-NS325 Power Supply Board Replacement: étape 6, image 1 de 1

    • Using two fingers, press in both the top and bottom clips to release the holder for the power cable to remove the cable completely.

    Modifier

  8. Sony DVP-NS325 Power Supply Board Replacement: étape 7, image 1 de 1

    • Pull the cable out of the case to fully replace the cable.

    Modifier

  9. Sony DVP-NS325 Power Supply Board Replacement, Power Supply Board: étape 8, image 1 de 2 Sony DVP-NS325 Power Supply Board Replacement, Power Supply Board: étape 8, image 2 de 2

    • Remove the wire connected to the motherboard by pulling the wire upwards.

    • Move the black holder piece out of the way in order to fully remove the wire from the area.

    Modifier

  10. Sony DVP-NS325 Power Supply Board Replacement: étape 9, image 1 de 1

    • Using a Phillips screwdriver, remove the four screws holding the motherboard in place.

    • There are three screws not shown all located on the corners of the motherboard.

    Modifier

  11. Sony DVP-NS325 Power Supply Board Replacement: étape 10, image 1 de 1

    • Remove the power supply board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

isaiah davila

Membre depuis le 09/13/23

469 Réputation

4 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

University of North Texas, Team 6-7, Kilpatrick Fall 2023 Membre de l'équipe University of North Texas, Team 6-7, Kilpatrick Fall 2023

UNT-KILPATRICK-F23S6G7

1 membre

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 50