Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Please note: you must remove the screws from the back casing before beginning this guide.

  1. Remove two Phillips #0 screws from the battery chamber.
    • Remove two Phillips #0 screws from the battery chamber.

    • Remove two Torx T6 screws from the battery chamber.

  2. Gently pry off the back casing.
    • Gently pry off the back casing.

    • Work an opening tool around the entire seam before attempting to pull off the casing. This action will reduce the chance of cracking the casing.

  3. Remove the casing to expose the camera's components.
    • Remove the casing to expose the camera's components.

  4. Gently pry open the front casing by working an opening tool along the entire seam.
    • Gently pry open the front casing by working an opening tool along the entire seam.

  5. Remove the front casing by gently lifting it from the phone.
    • Remove the front casing by gently lifting it from the phone.

    • Be careful not to pull off any other delicate pieces.

  6. Remove the keypad. The LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
    • Remove the keypad.

    • The LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Abby Evers

Membre depuis le 04/10/2011

202 Réputation

6 tutoriels rédigés

Équipe

UW Stout, Team 1-6, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 1-6, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G6

4 membres

12 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,071