Introduction
Use this guide to replace a defective Logic Board.
Ce dont vous avez besoin
Vidéo d'introduction
-
-
Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
-
Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
