Aller au contenu principal

Introduction

This guide will show you how to remove the Dark Grey case that allows you access to the Screens.

Pièces

Aucune pièce spécifiée.

  1. To remove the front cover, lift up the case with a fingernail in the small slot as shown.
    • To remove the front cover, lift up the case with a fingernail in the small slot as shown.

  2. To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.
    • To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.

  3. Pry up the dark grey case with your fingernail until all four snaps around the top are loose.
    • Pry up the dark grey case with your fingernail until all four snaps around the top are loose.

  4. Lift up towards the bottom and slide the case off.
    • Lift up towards the bottom and slide the case off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Alex Serventi

Membre depuis le 07/10/2010

50 Réputation

13 tutoriels rédigés

Équipe

Cal Poly, Team 5-15, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 5-15, Maness Fall 2010

CPSU-MANESS-F10S5G15

4 membres

26 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 1,041