1. Note: This camera came without a battery, thus all pictures shown will be missing a battery.
    • Note: This camera came without a battery, thus all pictures shown will be missing a battery.

    • Locate the battery pack which can be found on the back side of the camera below the viewfinder.

    • Push in the small button on the bottom of the camera, marked with the red circle, then slide the entire switch forward, marked with the yellow rectangle.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Slide the battery out of the back of the camera.
    • Slide the battery out of the back of the camera.

    • The battery can be inserted by sliding it back into place in a similar manner to how it was removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lauren

Membre depuis le 05/01/2011

244 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 7-44, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 7-44, Regan Winter 2011

CPSU-REGAN-W11S7G44

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 2,999