Introduction

Following this guides shows you how to remove the cassette lid from the device. Removing the cassette lid allows you to install a new one and enables you to remove the mechanism deck

Pièces

Aucune pièce nécessaire.

  1. Using a spudger, apply pressure towards the back corner of the cassette compartment to the plastic tab directly behind the gold cone.
    • Using a spudger, apply pressure towards the back corner of the cassette compartment to the plastic tab directly behind the gold cone.

    • Pushing the tab allows the hinge to be separated from the body of the device.

    • The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure.

    Ajouter un commentaire

  2. Next, use a plastic opening tool to pull the metal latch towards the speaker.
    • Next, use a plastic opening tool to pull the metal latch towards the speaker.

    • The latch should be clear of the slot in the cassette lid.

    • Be careful not to bend the latch too far, as it may warp.

    Ajouter un commentaire

    • Carefully lift the cassette lid, making sure the tab and latch are free from connection.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott

Membre depuis le 21/01/2012

1 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 10-34, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 10-34, Amido Winter 2012

CPSU-AMIDO-W12S10G34

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 16

Total : 910