Réparez vos affaires Communauté Boutique

Sony NEX-7 LCD Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. Sony NEX-7 LCD Assembly Replacement, LCD Assembly: étape 1, image 1 de 1

    • Remove the two 3/32" #00 screws located next to the viewfinder using the Phillips #00 screwdriver.

    Traduire

  2. Sony NEX-7 LCD Assembly Replacement: étape 2, image 1 de 1

    • Remove the two 5/32" #00 screws from the right side of the camera below the D ring using the Phillips #00 screwdriver.

    Traduire

  3. Sony NEX-7 LCD Assembly Replacement: étape 3, image 1 de 1

    • Remove two more 3/32" #00 screws from the bottom of the camera using the Phillips #00 screwdriver.

    Traduire

  5. Sony NEX-7 LCD Assembly Replacement: étape 4, image 1 de 1

    • Remove two more 3/32" #00 screws from the metal bracket on the left side of the camera using the Phillips #00 screwdriver.

    Traduire

  6. Sony NEX-7 LCD Assembly Replacement: étape 5, image 1 de 1

    • Unplug the orange ribbon cable on the top right of the camera next to the metal bracket by applying tweezers to the tabs on either side of the plug.

    Traduire

  7. Sony NEX-7 LCD Assembly Replacement: étape 6, image 1 de 1

    • Before pulling off the assembly, fold the rightmost tab of the flexible circuit board away from the metal bracket.

    Traduire

  8. Sony NEX-7 LCD Assembly Replacement: étape 7, image 1 de 2 Sony NEX-7 LCD Assembly Replacement: étape 7, image 2 de 2

    • The LCD assembly is attached with a concealed ribbon cable, so be gentle when you remove it.

    • The D ring brackets on either side are not attached, only held in mechanically. Once the LCD assembly starts to come out, they will detach.

    • Pull on the D rings on either side of the camera to start removing the assembly.

    • Once the brackets are cleared from black shell, take them off and set them aside.

    • Continue to remove the screen assembly.

    Traduire

  9. Sony NEX-7 LCD Assembly Replacement: étape 8, image 1 de 1

    • With the camera face down, move the assembly away from you to get a clear view of the wide ribbon cable.

    • Unplug the cable by applying tweezers to the tabs on either side of the plug.

    • Set the LCD assembly aside.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

Jay Miley

Membre depuis le 04/22/14

5 046 Réputation

13 tutoriels rédigés

Badges: 27

+ 24 badges supplémentaires

Équipe

Cal Poly, Team 10-55, Amido Spring 2014 Membre de l'équipe Cal Poly, Team 10-55, Amido Spring 2014

CPSU-AMIDO-S14S10G55

4 membres

31 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 64