Aller au contenu principal

Introduction

When removing the screen, you may want to use gloves so that no glass shards cut your hands.

  1. Use a Phillips #00 screwdriver to unscrew the two 5 mm screws located on the bottom of the back of the device.
    • Use a Phillips #00 screwdriver to unscrew the two 5 mm screws located on the bottom of the back of the device.

  2. Use a plastic opening tool to loosen the bottom portion of device.
    • Use a plastic opening tool to loosen the bottom portion of device.

  3. Use a plastic opening tool to loosen the top panel of the device.
    • Use a plastic opening tool to loosen the top panel of the device.

  4. Use a Phillips #00 screwdriver to remove the two 3 mm screws located on the portion under the top panel of the device.
    • Use a Phillips #00 screwdriver to remove the two 3 mm screws located on the portion under the top panel of the device.

  5. Remove the back plate from the device. Remove the back plate from the device. Remove the back plate from the device.
    • Remove the back plate from the device.

  6. Use a nylon spudger or tweezers to remove the plastic USB cover.
    • Use a nylon spudger or tweezers to remove the plastic USB cover.

  7. Use a Phillips #00 screwdriver to unscrew two 2 mm screws located on the top corners of the device.
    • Use a Phillips #00 screwdriver to unscrew two 2 mm screws located on the top corners of the device.

  8. Use a nylon spudger or tweezers to remove the plastic protective plate at the top of device.
    • Use a nylon spudger or tweezers to remove the plastic protective plate at the top of device.

  9. Remove the plastic protective frame located over the motherboard with tweezers and a spudger. Remove the plastic protective frame located over the motherboard with tweezers and a spudger.
    • Remove the plastic protective frame located over the motherboard with tweezers and a spudger.

  10. Remove screen connection from motherboard using tweezers and spudger.
    • Remove screen connection from motherboard using tweezers and spudger.

  11. Use a Phillips #00 screwdriver to remove two 3 mm screws at the bottom sides and two 1 mm screws at top sides of the device.
    • Use a Phillips #00 screwdriver to remove two 3 mm screws at the bottom sides and two 1 mm screws at top sides of the device.

  12. Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool. Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool.
    • Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool.

  13. Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool. Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool.
    • Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool.

  14. Use a plastic opening tool to remove the screen from metal back plate. Use a plastic opening tool to remove the screen from metal back plate.
    • Use a plastic opening tool to remove the screen from metal back plate.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Hintz

Membre depuis le 16/01/2015

323 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 17-6, Watkins Winter 2015 Membre de l'équipe USF Tampa, Team 17-6, Watkins Winter 2015

USFT-WATKINS-W15S17G6

4 membres

5 tutoriels rédigés

Un commentaire

very helpful!!! thx

Stefan Taubert - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 5

Total : 730