Réparez vos affaires Communauté Boutique

Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement

Introduction

Outline what you are going to teach someone how to do.

Ce dont vous avez besoin

  1. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement, Sony Radio Model CFD S05 Prerequisite steps Replacement: étape 1, image 1 de 1

    • Unscrew the screws on the top of the radio.

    Modifier

  2. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 2, image 1 de 2 Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 2, image 2 de 2

    • Open the CD and cassette doors and remove the screws in the compartments.

    • To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

    Modifier

  3. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 3, image 1 de 1

    • Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

    Modifier

  4. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 4, image 1 de 1

    • Remove the top of the radio enough to access the wires for removal.

    • Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.

    Modifier

  6. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 5, image 1 de 1

    • Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected

    • This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.

    Modifier

  7. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement, Belt for the Tape Motor: étape 6, image 1 de 1

    • Locate the motor of the radio on the underside of the top of the radio.

    Modifier

  8. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 7, image 1 de 1

    • Unscrew the screw holding the motor to the top of the radio.

    Modifier

  9. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 8, image 1 de 1

    • Lift up the motor.

    • Don't lift too high because the motor stand will break.

    Modifier

  10. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 9, image 1 de 1

    • Unhook the larger band from under the motor and remove it.

    Modifier

  11. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 10, image 1 de 1

    • Replace the band by hooking it beneath the motor.

    Modifier

  12. Sony Radio CD player and cassette player CFD-S05 Belt for the Tape Motor Replacement: étape 11, image 1 de 1

    • Push the motor back down and screw it into place.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Ian Nussman

Membre depuis le 10/25/13

959 Réputation

6 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013 Membre de l'équipe UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G5

2 membres

6 tutoriels rédigés

Un commentaire

I'm worried about removing wires. How do you put them back? Doesn't that take some kind of special equipment/glue?

Carolyn Farley - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 30

Total : 4,973