Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.
    • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

  2. Slide the back cover off by pushing it to the left, away from the side that held the screws.
    • Slide the back cover off by pushing it to the left, away from the side that held the screws.

    • Remove the cover.

  3. This is what the device should look like once the back cover panel has been removed.
    • This is what the device should look like once the back cover panel has been removed.

  4. Once the back cover has been removed locate the battery in the bottom right corner of the device.
    • Once the back cover has been removed locate the battery in the bottom right corner of the device.

    • Using the pointed end of the spudger, push out the white plug that is connected to the battery from its beige base.

  5. Use the flat end of the spudger to pry the battery out of its holder. There may be glue holding it in place.
    • Use the flat end of the spudger to pry the battery out of its holder. There may be glue holding it in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Terrika Ngobili

Membre depuis le 13/10/2014

857 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 1-4, Benson Fall 2014 Membre de l'équipe Clemson, Team 1-4, Benson Fall 2014

CLEM-BENSON-F14S1G4

4 membres

22 tutoriels rédigés

2 commentaires

It works great - thanks very much for this guide!

kitimatwoz - Réponse

where can i buy the battery for replacement ?? what battery is ? Answer me pls on: edgarjacob16@gmail.com

Edgar Jacob - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 44

Total : 3,379