Aller au contenu principal

Sony Reader Touch Edition PRS-600 Battery Replacement

Ce dont vous avez besoin

  1. Sony Reader Touch Edition PRS-600 Battery Replacement, Back Panel: étape 1, image 1 de 1
    • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

  2. Sony Reader Touch Edition PRS-600 Battery Replacement: étape 2, image 1 de 1
    • Slide the back cover off by pushing it to the left, away from the side that held the screws.

    • Remove the cover.

  3. Sony Reader Touch Edition PRS-600 Battery Replacement: étape 3, image 1 de 1
    • This is what the device should look like once the back cover panel has been removed.

  4. Sony Reader Touch Edition PRS-600 Battery Replacement, Battery: étape 4, image 1 de 1
    • Once the back cover has been removed locate the battery in the bottom right corner of the device.

    • Using the pointed end of the spudger, push out the white plug that is connected to the battery from its beige base.

  5. Sony Reader Touch Edition PRS-600 Battery Replacement: étape 5, image 1 de 1
    • Use the flat end of the spudger to pry the battery out of its holder. There may be glue holding it in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Terrika Ngobili

Membre depuis le 10/13/14

857 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 1-4, Benson Fall 2014 Membre de l'équipe Clemson, Team 1-4, Benson Fall 2014

CLEM-BENSON-F14S1G4

4 membres

22 tutoriels rédigés

2 commentaires

It works great - thanks very much for this guide!

kitimatwoz - Réponse

where can i buy the battery for replacement ?? what battery is ? Answer me pls on: edgarjacob16@gmail.com

Edgar Jacob - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 11

30 derniers jours : 61

Total : 4,624