Introduction

In this guide we will be taking the smart watch out of its housing to remove its screen in order to reach the interior components. This process will only require a small tool with a flat edge.

Pièces

Aucune pièce nécessaire.

Detach the smart watch from the band by pushing on the back of the watch housing.
  • Detach the smart watch from the band by pushing on the back of the watch housing.

    • The power button may fall out once the smart watch is detached.

  • Set aside the power button and watch band as they are no longer needed for further disassembly.

Ajouter un commentaire

Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
  • Use a plastic opening tool to carefully pry the LCD screen from the watch housing.

Ajouter un commentaire

  • Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.

Ajouter un commentaire

  • Set aside the detached LCD screen to access the battery.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these steps in reverse order.

Une autre personne a terminé cette réparation.

Vincent Shiue

Membre depuis le 22/01/2018

232 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S1-G5, Freund Spring 2018 Membre de l'équipe IUPUI, Team S1-G5, Freund Spring 2018

IUPUI-FREUND-S18S1G5

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 15

30 derniers jours : 71

Total : 383