Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Position the laptop screen-side down as shown.
-
In this position the battery housing will be located on the right hand side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the panel up and then out to gain access to the battery.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the indentations to pull the old battery out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The battery is now removed and it is safe to move on to uninstalling other components.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
There are two screws on the left hand side of the laptop near the IR receiver. remove them using a #00 Philips head screwdriver.
-
Slide the speaker panel towards the left, then carefully flip it over onto the keyboard.
-
Make sure not to pull the speaker panel away from the computer just yet - it is still connected!
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the beige tab in the direction of the ribbon. it should only move a small amount
-
Remove the ribbon by gently pulling on it, there should be little or no resistance.
-
Now the speaker panel can be set aside.
-