Introduction

This guide will show you how to identify and properly remove the hard drive for the Sony Vaio Fit SVF15N26CXB. Use the project mat to keep the screws organized.

Remove the following ten screws from the bottom case of the laptop:
  • Remove the following ten screws from the bottom case of the laptop:

    • Two 6.5mm Phillips #00 Phillips screws.

    • Four 8.95mm Phillips #00 screws.

    • Four 6.25mm Phillips #00 screws.

  • The screws may be hidden underneath a rubber foot that can be removed with a spudger.

Ajouter un commentaire

Use a plastic opening tool to separate the bottom cover from the laptop.
  • Use a plastic opening tool to separate the bottom cover from the laptop.

  • Lift the lower cover and pull away from the laptop.

Ajouter un commentaire

  • Remove the eight Phillips #00 screws from the battery:

    • Six 4.65mm screws.

    • Two 4.65mm screws.

Ajouter un commentaire

  • Lift the battery up and pull it out of the laptop.

Ajouter un commentaire

  • Remove the four 3.20mm Phillips #00 screws from the hard drive.

Ajouter un commentaire

  • Use a spudger to flip up the black latch on the ZIF connectors.

  • Pull the ribbon cables out of the ZIF connectors and fold them over the hard drive.

  • Disconnect the hard drive and remove.

Ajouter un commentaire

  • Remove the four 3.70mm Phillips #00 screws from the hard drive mounting case.

  • Carefully peel foil tray off of hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Althea McDavid

Membre depuis le 14/02/2018

730 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team S2-G4, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S2-G4, Nance Spring 2018

USFT-NANCE-S18S2G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 100