Introduction

RAM acts as the temporary memory for your device. RAM can become damaged, or more RAM may be needed to accomplish arduous tasks. This guide will demonstrate how to remove and replace your RAM.

Pièces

Aucune pièce nécessaire.

Be sure to  disconnect the device charger and power down the device before beginning. Turn the device over onto its back, where the battery is at the top of the device. Slide the "lock" switch to the right. Turn the device over onto its back, where the battery is at the top of the device. Slide the "lock" switch to the right.
  • Be sure to disconnect the device charger and power down the device before beginning.

  • Turn the device over onto its back, where the battery is at the top of the device. Slide the "lock" switch to the right.

Ajouter un commentaire

Slide the  "release" switch to the left  and gently lift the battery up to remove it. Completely remove the battery from the device. Completely remove the battery from the device.
  • Slide the "release" switch to the left and gently lift the battery up to remove it.

  • Completely remove the battery from the device.

Ajouter un commentaire

The RAM cards reside in the rectangle shaped plate in the center of the back panel of the device.
  • The RAM cards reside in the rectangle shaped plate in the center of the back panel of the device.

Ajouter un commentaire

Unscrew the single PH1  6mm screw at the top of the panel. The screw remains in the panel. Remove the panel by lifting it towards yourself.
  • Unscrew the single PH1 6mm screw at the top of the panel. The screw remains in the panel.

  • Remove the panel by lifting it towards yourself.

Ajouter un commentaire

To remove the individual RAM  card panels,  snap back the metal latches on each side of the cards. To remove the individual RAM  card panels,  snap back the metal latches on each side of the cards. To remove the individual RAM  card panels,  snap back the metal latches on each side of the cards.
  • To remove the individual RAM card panels, snap back the metal latches on each side of the cards.

Ajouter un commentaire

After pinching the metal latches, the RAM card should pop out slightly upward. Remove the cards by pulling them out to the left.
  • After pinching the metal latches, the RAM card should pop out slightly upward.

  • Remove the cards by pulling them out to the left.

  • Repeat for the second panel of RAM cards.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sean Lyon

Membre depuis le 01/03/2018

351 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G1, Simcock Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G1, Simcock Spring 2018

UMASSD-SIMCOCK-S18S2G1

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 54