Réparez vos affaires Communauté Boutique

Sony Vaio PCG-7A2L RAM Replacement

Introduction

This guide helps users replace the RAM in the Sony Vaio PCG-7A2L laptop.

Ce dont vous avez besoin

  1. Sony Vaio PCG-7A2L RAM Replacement, Battery: étape 1, image 1 de 1

    • Lay the closed laptop on its screen so the bottom is facing towards you.

    Traduire

  2. Sony Vaio PCG-7A2L RAM Replacement: étape 2, image 1 de 1

    • Push both latches towards the center of the battery.

    Traduire

  3. Sony Vaio PCG-7A2L RAM Replacement: étape 3, image 1 de 2 Sony Vaio PCG-7A2L RAM Replacement: étape 3, image 2 de 2

    • Revome the battery by pushing it away from the laptop.

    • Set the battery away from the laptop.

    Traduire

  5. Sony Vaio PCG-7A2L RAM Replacement, RAM Cover: étape 4, image 1 de 2 Sony Vaio PCG-7A2L RAM Replacement, RAM Cover: étape 4, image 2 de 2

    • With the bottom of the laptop facing up, locate the RAM cover.

    • The RAM is covered by the panel with four columns of vents.

    • Locate the screw (Length: 4.8 mm) holding down the panel, which is near the edge of the laptop. Unscrew it with your phillips #0 screwdriver.

    Traduire

  6. Sony Vaio PCG-7A2L RAM Replacement: étape 5, image 1 de 3 Sony Vaio PCG-7A2L RAM Replacement: étape 5, image 2 de 3 Sony Vaio PCG-7A2L RAM Replacement: étape 5, image 3 de 3

    • Use your fingers to slide the cover away from the laptop. (It will only slide a few millimeters)

    • Once the panel is out of its locked position, it can be lifted out without any resistance.

    Traduire

  7. Sony Vaio PCG-7A2L RAM Replacement, RAM: étape 6, image 1 de 3 Sony Vaio PCG-7A2L RAM Replacement, RAM: étape 6, image 2 de 3 Sony Vaio PCG-7A2L RAM Replacement, RAM: étape 6, image 3 de 3

    • To remove the RAM, use sharp end of a spudger to push the two silver tabs (see picture) away from the green RAM chip.

    • When both silver tabs are moved to the side, one edge of the RAM chip will pop up from its original position.

    • Use your fingers to grab the raised edge of the RAM and pull the chip away from its connection to the laptop.

    Traduire

  8. Sony Vaio PCG-7A2L RAM Replacement: étape 7, image 1 de 1

    • To install the new RAM, grip the new chip exactly the same way as you gripped the old chip when you removed it.

    • Insert the gold leads of the RAM into the connection at the same angle the original chip was raised at after the tabs were released.

    • There is a raised tab on the connection that mates with a slit in the RAM to ensure you do not put the chip in upside down.

    Traduire

  9. Sony Vaio PCG-7A2L RAM Replacement: étape 8, image 1 de 1
    Traduire
Ligne d'arrivée

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Michael Maravick

Membre depuis le 04/15/10

75 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 24-32, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 24-32, Regan Spring 2010

CPSU-REGAN-S10S24G32

4 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 10

Total : 10,375