Introduction

The PCG F360 comes with a floppy drive in an expansion bay. This can be replaced or swapped out for a battery or for a weight saver.

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

  1. Position the laptop screen-side down as shown.
    • Position the laptop screen-side down as shown.

    • In this position the battery housing will be located on the right hand side.

  2. Lift the panel up and then out to gain access to the battery.
    • Lift the panel up and then out to gain access to the battery.

    • Use the indentations to pull the old battery out.

    • The battery is now removed and it is safe to move on to uninstalling other components.

    • With one hand slide and hold the tab shown.

    • With your other hand, pull the floppy drive out of the floppy drive bay.

    • To replace the floppy drive, simply slide the drive into the slot until it clicks.

Conclusion

To reassemble your device, follow these instructions in reverse order.

ahintz

Membre depuis le 21/04/2010

19 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 16-3, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 16-3, Maness Spring 2010

CPSU-MANESS-S10S16G3

3 membres

8 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,655