Aller au contenu principal

Introduction

This guide helps users to remove the back panel, which is required to access the other pieces of the laptop and is the first step to any part replacement.

Pièces

Aucune pièce spécifiée.

  1. Unscrew the eleven 6 mm screws from the back panel on the bottom of laptop with the Phillips #0 screwdriver.
    • Unscrew the eleven 6 mm screws from the back panel on the bottom of laptop with the Phillips #0 screwdriver.

    • Unscrew the one 4 mm screw from the back panel on the bottom of laptop with the Phillips #0 screwdriver.

    • 6 mm screws marked in red, 4 mm marked in orange

  2. Using a plastic opening tool, pull the optical drive out of the computer by the seam. In reassembly, slide the optical drive back in after reapplying cover.
    • Using a plastic opening tool, pull the optical drive out of the computer by the seam.

    • In reassembly, slide the optical drive back in after reapplying cover.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Run the opening tool along the bottom cover seam.
    • Run the opening tool along the bottom cover seam.

  5. Lift the clip marked in red in order to release the back cover.
    • Lift the clip marked in red in order to release the back cover.

    • Lift the back cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Quinn Walter

Membre depuis le 04/10/2018

293 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 15

Total : 126