Aller au contenu principal

Sony Vaio Tap 11 Wifi Module Replacement

Ce dont vous avez besoin

  1. Sony Vaio Tap 11 Wifi Module Replacement, Screen Assembly: étape 1, image 1 de 1
    • Begin by opening the HDMI/USB port cover on the left edge.

    • Remove the three #000 headed, 3 mm long screws located underneath the port cover.

  2. Sony Vaio Tap 11 Wifi Module Replacement: étape 2, image 1 de 1
    • Locate and open the Micro SD slot on the top side of the device.

    • Remove the two screws located beneath the cover.

  3. Sony Vaio Tap 11 Wifi Module Replacement: étape 3, image 1 de 2 Sony Vaio Tap 11 Wifi Module Replacement: étape 3, image 2 de 2
    • Attach the suction cup to the top right area of the screen.

    • Pull to separate the screen from the rest of the device.

    • Be aware of the front camera cable that is still connected to the rest of the device.

    • Detach the display ribbon cable.

  4. Sony Vaio Tap 11 Wifi Module Replacement, Solid State Disk: étape 4, image 1 de 1
    • Unplug the battery connector located beside the fan.

    • Locate the SSD on the right side of the device, above the battery and beneath the WiFi chip.

  5. Sony Vaio Tap 11 Wifi Module Replacement: étape 5, image 1 de 1
    • Remove the two 3 mm Phillips #000 screws from the right edge of the SSD.

  6. Sony Vaio Tap 11 Wifi Module Replacement: étape 6, image 1 de 2 Sony Vaio Tap 11 Wifi Module Replacement: étape 6, image 2 de 2
    • Pull the SSD towards the right and slightly up, removing it from the back assembly.

  7. Sony Vaio Tap 11 Wifi Module Replacement, Wifi Module: étape 7, image 1 de 3 Sony Vaio Tap 11 Wifi Module Replacement, Wifi Module: étape 7, image 2 de 3 Sony Vaio Tap 11 Wifi Module Replacement, Wifi Module: étape 7, image 3 de 3
    • Begin by removing the orange ribbon cable connecting the motherboard to the daughterboard, located above the SSD.

    • Gently tug either side until it releases, then pull out the other end.

  8. Sony Vaio Tap 11 Wifi Module Replacement: étape 8, image 1 de 1
    • Remove the grey foam separator that was underneath the orange ribbon cable.

  9. Sony Vaio Tap 11 Wifi Module Replacement: étape 9, image 1 de 1
    • Remove the silver 3 mm Phillips screw that holds the WiFi module in place.

  10. Sony Vaio Tap 11 Wifi Module Replacement: étape 10, image 1 de 1
    • Remove the black and grey antenna cables from the right side of the device.

  11. Sony Vaio Tap 11 Wifi Module Replacement: étape 11, image 1 de 1
    • Remove module by gently pulling towards the right.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Alexander Bridges

Membre depuis le 09/16/15

1 217 Réputation

7 tutoriels rédigés

Équipe

IUPUI, Team 1-2, Harley Fall 2015 Membre de l'équipe IUPUI, Team 1-2, Harley Fall 2015

IUPUI-HARLEY-F15S1G2

4 membres

20 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 8

Total : 2,137