Réparez vos affaires Communauté Boutique

Sony Xperia XA2 Ultra Motherboard Bracket Replacement

Introduction

To access many of the inner components of the Sony Xperia XA2 Ultra, the motherboard bracket will need to be removed.

Before taking any steps to open the phone, make sure that it is turned completely off.

Be aware that when using a heat gun (or something similar) that the device will heat up. Continue with caution.

Ce dont vous avez besoin

  1. Sony Xperia XA2 Ultra Motherboard Bracket Replacement, Rear Cover: étape 1, image 1 de 2 Sony Xperia XA2 Ultra Motherboard Bracket Replacement, Rear Cover: étape 1, image 2 de 2

    • Turn off your phone before continuing.

    • Remove the SIM card tray on the left side of the phone using a SIM card eject tool.

    Modifier

  2. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 2, image 1 de 1

    • Heat the edge of the phone with the heat gun (recommended) for 30 seconds.

    • If you don't have a heat gun, a hair dryer can be used.

    • Use the hair dryer on the highest setting, constantly going around the phone to heat all of the edges.

    • The phone will become hot to the touch. Use gloves or a towel to touch the phone.

    Modifier

  3. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 3, image 1 de 2 Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 3, image 2 de 2

    • Apply the suction handle near an edge of the phone and pull upwards while trying to get an opening large enough for an iFixit opening pick.

    Modifier

  5. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 4, image 1 de 2 Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 4, image 2 de 2

    • Pry upwards with the pick to start pulling the rear cover off the adhesive it’s attached to.

    • Insert a second pick once there is enough room.

    Modifier

  6. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 5, image 1 de 2 Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 5, image 2 de 2

    • Take one of the picks and try to slide it down the side of the phone, pulling more of the cover off the adhesive.

    • The iFixit opening tool may also be used to gain better leverage.

    • The rear cover will pop off.

    Modifier

  7. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 6, image 1 de 1

    • Once the rear cover is off, use the iFixit opening tool to detach the flex cable.

    Modifier

  8. Sony Xperia XA2 Ultra Motherboard Bracket Replacement, Motherboard Bracket: étape 7, image 1 de 2 Sony Xperia XA2 Ultra Motherboard Bracket Replacement, Motherboard Bracket: étape 7, image 2 de 2

    • Remove the six 3 mm Phillips #000 screws.

    Modifier

  9. Sony Xperia XA2 Ultra Motherboard Bracket Replacement: étape 8, image 1 de 1

    • Remove the motherboard bracket with an iFixit opening tool.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Alyssa Bayles

Membre depuis le 09/27/22

819 Réputation

8 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Utah Tech University, Team 1-1, Randazzo Fall 2023 Membre de l'équipe Utah Tech University, Team 1-1, Randazzo Fall 2023

UTAHTECH-RANDAZZO-F23S1G1

1 membre

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 56