Heat to soften back cover sticker.
  • Heat to soften back cover sticker.

  • Place suction cup and pull open a gap.

Ajouter un commentaire

Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.
  • Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.

Ajouter un commentaire

  • Remove the battery.

Ajouter un commentaire

  • Twist off two screws here.

  • Release all the connectors connecting with loudspeaker assembly.

  • Remove vibrator securing bracket.

Ajouter un commentaire

  • Remove loudspeaker assembly cover and assembly itself.

Ajouter un commentaire

  • Pry up the MIC. It's a part of the main flex.

  • Release the connector with LCD screen flex and the connector with motherboard.

Ajouter un commentaire

  • Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily.

  • Pry up the lower shutter button flex branch bracket carefully. It's different from the upper one, it's come with the flex together but the upper one not.

Ajouter un commentaire

  • Get the flex from the sticker underneath carefully.

  • And then, take the power button & volume button flex branch out from the slot.

  • Finally, remove the whole main flex.

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autre(s) ont terminé cette réparation.

Sophia

Membre depuis le 25/03/2014

40 277 Réputation

62 tutoriels rédigés

Hello

I changed my power, but I felt the power button action do you think the problem of what can be

Thanks

mehdi ghanbarian - Réponse

very good thnx

gamaa19700 - Réponse

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 79

Total : 6,544