Aller au contenu principal

Introduction

Wanna disassemble and change Sony Xperia Z5 Compact LCD screen assembly by yourself, following this guide.

Vidéo d'introduction

  1. Power off and remove SIM card tray. Power off and remove SIM card tray.
    • Power off and remove SIM card tray.

  2. Heat up the back cover to soften the adhesive. Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath. Remove back cover.
    • Heat up the back cover to soften the adhesive.

    • Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath.

    • Remove back cover.

  3. Twist off 10 Phillips screws all. Loosen NFC clip and flashlight clip.
    • Twist off 10 Phillips screws all.

    • Loosen NFC clip and flashlight clip.

  4. Remove the plastic bracket. Pry up and remove back frame. Pry up and remove back frame.
    • Remove the plastic bracket.

    • Pry up and remove back frame.

  5. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  6. Remove front camera. Remove front camera. Remove front camera.
    • Remove front camera.

  7. Remove rear camera. Remove rear camera. Remove rear camera.
    • Remove rear camera.

  8. Remove loudspeaker. Remove loudspeaker.
    • Remove loudspeaker.

  9. Release charging port connector. Remove plastic protective bar. Pry up motherboard assembly from this side. There are three flex connectors connecting the motherboard underneath. So pry up the motherboard assembly gently.
    • Release charging port connector.

    • Remove plastic protective bar.

    • Pry up motherboard assembly from this side. There are three flex connectors connecting the motherboard underneath. So pry up the motherboard assembly gently.

  10. Push audio jack out of the slot, no adhesive underneath. Release LCD flex connector and main flex connector. Separate motherboard assembly from middle housing.
    • Push audio jack out of the slot, no adhesive underneath.

    • Release LCD flex connector and main flex connector.

    • Separate motherboard assembly from middle housing.

  11. The sticker underneath LCD assembly is a little bit strong, so use heat gun to soften it for a few minutes. Remove LCD with digitizer assembly carefully. Remove LCD with digitizer assembly carefully.
    • The sticker underneath LCD assembly is a little bit strong, so use heat gun to soften it for a few minutes.

    • Remove LCD with digitizer assembly carefully.

  12. Done.
    • Done.

Conclusion

To reassemble your device, follow these instructions in reverse order.

20 autre(s) ont terminé cette réparation.

Witrigs

Membre depuis le 24/11/2015

61 526 Réputation

388 tutoriels rédigés

18 commentaires

But what kind of glue do we need to use when we reconnect the screen and the case?

Ronen Yudzinsky - Réponse

screen replacement is possible without removing the back cover and logic board, similar to the Z1 compact. Simply remove the metal cover once you took the screen off to disconnect the lcd/digi cable.

Toby Liedke - Réponse

Yeah, I'm confused as to why everything from the back needs to be taken out, when you have to heat up the front sticker anyways and disconnect it. Seems fairly simple to just heat up, cut side adhesive, lift, unplug.

Brian Santero -

Have you done the repair that way, Toby Liedke?

jesinisterra - Réponse

nice guide, for my first reparation, all was fine. Thanks!

bvo - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 12

7 derniers jours : 93

30 derniers jours : 350

Total : 27,464