Aller au contenu principal
  1. Heat the back cover to soften the adhesive sticker. Place the suction cup and inert metal opening tool to open a gap from top side.
    • Heat the back cover to soften the adhesive sticker.

    • Place the suction cup and inert metal opening tool to open a gap from top side.

  2. Insert the guitar pick and slide it to cut the adhesive sticker underneath. Remove back cover. Remove back cover.
    • Insert the guitar pick and slide it to cut the adhesive sticker underneath.

    • Remove back cover.

  3. Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Release battery connector in order to prevent short circuit.
    • Release battery connector in order to prevent short circuit.

  5. Remove rear camera. Remove rear camera. Remove rear camera.
    • Remove rear camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Lenka

Membre depuis le 06/11/2015

2 138 Réputation

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 20

Total : 4,226