Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.