Aller au contenu principal

Sprint Sanyo RL-4920 Display Replacement

Ce dont vous avez besoin

  1. Sprint Sanyo RL-4920 Display Replacement, Back of Phone: étape 1, image 1 de 1
    • Flip the phone over so that the screen is facing down.

  2. Sprint Sanyo RL-4920 Display Replacement, Remove Battery Pack: étape 2, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement, Remove Battery Pack: étape 2, image 2 de 2
    • Push the gray lever up towards the top of the phone.

    • Pull up on the battery pack and completely separate it from the phone.

  3. Sprint Sanyo RL-4920 Display Replacement, Screws: étape 3, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement, Screws: étape 3, image 2 de 2
    • Locate the five screws around the back casing.

    • Use a three-prong screw bit to remove all five screws.

  4. Sprint Sanyo RL-4920 Display Replacement, Separate Cases: étape 4, image 1 de 1
    • Use the plastic opening tool and slide it around the phone to pull apart the front and back casing.

  5. Sprint Sanyo RL-4920 Display Replacement, Separate Cases: étape 5, image 1 de 1
    • Separate the two cases.

  6. Sprint Sanyo RL-4920 Display Replacement, The Front Case: étape 6, image 1 de 1
    • Use the plastic opening tool to remove the motherboard from the front case.

  7. Sprint Sanyo RL-4920 Display Replacement, Display: étape 7, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement, Display: étape 7, image 2 de 2
    • Locate the 4 white clips of the dispaly.

  8. Sprint Sanyo RL-4920 Display Replacement: étape 8, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement: étape 8, image 2 de 2
    • Using the plastic opening tool, pull the white clips of the display away from the printed circuit board to unclip display.

  9. Sprint Sanyo RL-4920 Display Replacement: étape 9, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement: étape 9, image 2 de 2
    • Grasp the display on both sides and carefully pull the display off of the printed circuit board.

  10. Sprint Sanyo RL-4920 Display Replacement: étape 10, image 1 de 2 Sprint Sanyo RL-4920 Display Replacement: étape 10, image 2 de 2
    • Using the plastic opening tool, carefully remove the yellow film covering the display connector.

    • Do not damage the yellow film. Ensure that it stays in one piece and does not tear.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Patrick Olmstead

Membre depuis le 10/22/13

240 Réputation

2 tutoriels rédigés

Équipe

Clemson, Team 13-5, Benson Fall 2013 Membre de l'équipe Clemson, Team 13-5, Benson Fall 2013

CLEM-BENSON-F13S13G5

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 240