Aller au contenu principal

Staples 34462 Electric Pencil Sharpener Cover

Ce dont vous avez besoin

  1. Staples 34462 Electric Pencil Sharpener Cover, Cover: étape 1, image 1 de 1
    • Pull out the shavings tray from the pencil sharpener.

    • Beware of loose pencil shavings falling on your workspace.

  2. Staples 34462 Electric Pencil Sharpener Cover: étape 2, image 1 de 1
    • Turn the pencil sharpener on its side.

  3. Staples 34462 Electric Pencil Sharpener Cover: étape 3, image 1 de 1
    • Using a Phillips00 screwdriver, remove the two front 11.6mm screws.

    • Using the plastic opening tool, remove the back plastic feet.

    • After removing the back plastic feet, using a Phillips 00 screwdriver, remove the two back 11.6mm screws.

    • The hole is deeper than you may think. It may take some time to get the screwdriver to click in.

  4. Staples 34462 Electric Pencil Sharpener Cover: étape 4, image 1 de 1
    • Carefully pull apart the bottom panel from the top panel.

    • Be careful not to pull too forcefully as the panels are connected by wires.

    • Beware of pencil shavings falling out onto your workspace.

  5. Staples 34462 Electric Pencil Sharpener Cover: étape 5, image 1 de 1
    • Using a Phillips00 screwdriver, remove two 8.9mm flat edge screws from the top section of the top panel.

  6. Staples 34462 Electric Pencil Sharpener Cover: étape 6, image 1 de 1
    • Using a Phillips00 screwdriver, remove two 10.3mm screws from the middle section of the top panel.

  7. Staples 34462 Electric Pencil Sharpener Cover: étape 7, image 1 de 1
    • Carefully pull the cover from the top panel and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jen Hawkins

Membre depuis le 10/27/14

470 Réputation

4 tutoriels rédigés

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 5

30 derniers jours : 16

Total : 865