Introduction
The ready light is a simple LED that shows when the Barista has heated up to its needed temperature. This LED may burn out or its connectors may loosen.
Ce dont vous avez besoin
-
-
-
Locate the ready light.
-
Gently push the fixture against the Barista wall.
-
Pull the fixture straight up to release it.
-
Note: The fixture works as a spring.
-
Note: The green cover from the front panel will "pop" off. Do not lose the green cover.
-
Disconnect the wire lead connectors.
-
Remove the ready light unit (fixture).
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
4 commentaires
Beee2smoove.
Youth and sports for
Ttuii addinsists