Réparez vos affaires Communauté Boutique

SteelSeries Apex 64145 LED Replacement

Introduction

You will be removing the back of the keyboard in order to replace broken LED lights. This is to ensure the keys from lighting up as this is one of the key attraction of the SteelSeries keyboard.

Ce dont vous avez besoin

  1. SteelSeries Apex 64145 LED Replacement, Gel Membrane: étape 1, image 1 de 1

    • Unplug the keyboard from the computer.

    Modifier

  2. SteelSeries Apex 64145 LED Replacement: étape 2, image 1 de 1

    • Unscrew the twenty black 4.5 mm Phillips #1 screws on the back of the keyboard.

    Modifier

  3. SteelSeries Apex 64145 LED Replacement: étape 3, image 1 de 1

    • Pry open the back of the keyboard.

    Modifier

  4. SteelSeries Apex 64145 LED Replacement: étape 4, image 1 de 2 SteelSeries Apex 64145 LED Replacement: étape 4, image 2 de 2

    • Remove the gel membrane.

    Modifier

  6. SteelSeries Apex 64145 LED Replacement, LED: étape 5, image 1 de 2 SteelSeries Apex 64145 LED Replacement, LED: étape 5, image 2 de 2

    • Unscrew the two silver 4.0 mm Phillips #1 screws and the three black 6.5 mm Phillips #1 screws holding the silicone sheets.

    Modifier

  7. SteelSeries Apex 64145 LED Replacement: étape 6, image 1 de 1

    • Flip the chip slightly in order to remove the sheets.

    Modifier

  8. SteelSeries Apex 64145 LED Replacement: étape 7, image 1 de 1

    • Remove the sheets.

    Modifier

  9. SteelSeries Apex 64145 LED Replacement: étape 8, image 1 de 2 SteelSeries Apex 64145 LED Replacement: étape 8, image 2 de 2

    • Unscrew the two silver 4.5 mm Phillips #1 screws and the seven 5.0 mm Phillips #1 screws that deter the plastic panel from removal.

    Modifier

  10. SteelSeries Apex 64145 LED Replacement: étape 9, image 1 de 1

    • Remove the plastic panel and the white sheet.

    Modifier

  11. SteelSeries Apex 64145 LED Replacement: étape 10, image 1 de 3 SteelSeries Apex 64145 LED Replacement: étape 10, image 2 de 3 SteelSeries Apex 64145 LED Replacement: étape 10, image 3 de 3

    • Unplug the wires connected to the LEDs.

    Modifier

  12. SteelSeries Apex 64145 LED Replacement: étape 11, image 1 de 2 SteelSeries Apex 64145 LED Replacement: étape 11, image 2 de 2

    • Remove the LEDs.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Zwe Phone Shein

Membre depuis le 02/28/17

559 Réputation

5 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

USF Tampa, Team S1-G1, Nance Spring 2017 Membre de l'équipe USF Tampa, Team S1-G1, Nance Spring 2017

USFT-NANCE-S17S1G1

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 27

30 derniers jours : 157

Total : 13,679