Réparez vos affaires Communauté Boutique

Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement

Introduction

This guide shows you how to replace the two activations buttons for the Sublue WhiteShark Mix Underwater Scooter.

  1. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Top Floater Removal: étape 1, image 1 de 1

    • Remove the black screw by rotating it counterclockwise.

    Modifier

  2. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 2, image 1 de 1

    • Hold the device in place and pull up on the floater.

    Modifier

  3. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 3, image 1 de 1

    • Remove the top floater.

    Modifier

  4. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Battery: étape 4, image 1 de 1

    • Turn the device upside-down.

    Modifier

  6. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 5, image 1 de 1

    • Press the push button in while sliding the planner towards the back of the device to remove the battery panel.

    Modifier

  7. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 6, image 1 de 1

    • A push tab holds the battery in.

    Modifier

  8. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 7, image 1 de 1

    • Push the tab in and pull the battery outward to remove it.

    Modifier

  9. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Lower Panel: étape 8, image 1 de 1

    • Remove the ten Phillips screws on the bottom of the device. Remove the bottom panel.

    Modifier

  10. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 9, image 1 de 1

    • Pull the panel forward.

    • You may need to use pry tools to aid in separating the panels.

    Modifier

  11. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement, Activation Buttons: étape 10, image 1 de 1

    • There are two action buttons on each side of the main body.

    Modifier

  12. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 11, image 1 de 1

    • Push on the top outer corner of each action button to pop them out of place.

    Modifier

  13. Sublue WhiteShark Mix Underwater Scooter Activation Buttons Replacement: étape 12, image 1 de 1

    • After each action button is released, pull outward to remove.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Benjamin J Farland

Membre depuis le 10/30/23

269 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023 Membre de l'équipe UMass Dartmouth, Team 2-6, Gulbrandsen Fall 2023

UMASSD-GULBRANDSEN-F23S2G6

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 8

Total : 42