Réparez vos affaires Communauté Boutique

Swagtron T3 Battery Replacement

Introduction

If your Swagtron T3 battery is not working, this guide will show you how to replace it. To avoid electric shock, discharge the capacitors using the capacitor discharge tool before making any changes to your Swagtron.

Ce dont vous avez besoin

  1. Swagtron T3 Battery Replacement, Cover: étape 1, image 1 de 2 Swagtron T3 Battery Replacement, Cover: étape 1, image 2 de 2

    • Make sure the hoverboard is completely powered off and unplugged from any outlets.

    • Flip the Swagtron so that the footpads are facing the ground.

    • Unscrew the sixteen 9.4 mm Phillips #1 machine screws on the side of the Swagtron that is now facing upwards.

    Modifier

  2. Swagtron T3 Battery Replacement: étape 2, image 1 de 3 Swagtron T3 Battery Replacement: étape 2, image 2 de 3 Swagtron T3 Battery Replacement: étape 2, image 3 de 3

    • Be careful with the small blue capacitors indicated by the orange box. There are many of these capacitors in the device.

    • Slowly lift the backside cover.

    • Both sides lift up the same way, but the motherboard is under one side and the battery is under the other.

    • Detach the four cables connected to the cover by pinching the connector clips and pulling the cables out:

    • Three cables on the motherboard side.

    • Two red cables with white connectors and one white cable with a white connector.

    • One yellow cable with a black connector on the battery side.

    • After detachment, you should be able to completely remove the backside cover.

    Modifier

  4. Swagtron T3 Battery Replacement, Battery: étape 3, image 1 de 1

    • Unscrew the four 9.4 mm Phillips #1 machine screws attaching the battery to the base of the Swagtron T3.

    Modifier

  5. Swagtron T3 Battery Replacement: étape 4, image 1 de 2 Swagtron T3 Battery Replacement: étape 4, image 2 de 2

    • Detach the two cables connecting the battery to the Swagtron by pinching the connector clips and pulling the cables apart:

    • One red and black cable with a yellow connector.

    • One blue cable with a black connector.

    Modifier

  6. Swagtron T3 Battery Replacement: étape 5, image 1 de 2 Swagtron T3 Battery Replacement: étape 5, image 2 de 2

    • Remove the battery by pulling it out from under the cables.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Neeki Jarrami

Membre depuis le 04/10/17

197 Réputation

1 tutoriel rédigé

Badges: 14

+ 11 badges supplémentaires

Équipe

Cal Poly, Team S13-G3, Forte Spring 2017 Membre de l'équipe Cal Poly, Team S13-G3, Forte Spring 2017

CPSU-FORTE-S17S13G3

4 membres

4 tutoriels rédigés

11 commentaires

where can i get a replacement battery?

rob - Réponse

Where can I get a replacement battery?

rob - Réponse

I can’t find a battery with the two wire harnesses coming out of the pack. Where can I order one?

Jeff Johnson - Réponse

Where Can I purchase a replacement batter for the T3

Leandre - June 18

Leandre Thornton - Réponse

Swagtron doesn’t sell the silver battery (even if you email them) I bought one from HoverboardRepair.com and it worked. Only difference is the small wire doesn’t come on the new battery but my hoverboard has worked just fine and I replaced the battery months ago.

Daniel Moravec - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 17

Total : 8,054