Introduction
This guide can be used to replace the wires to ensure that all the wires are connected correctly for your Swann Doorphone Video Intercom.
Ce dont vous avez besoin
-
-
Flip the monitor of the Swann Doorphone over so that the underside is facing up.
-
Grip the sides of the black rectangular frame where they extend outwards and pull down.
-
After pulling down, pull the frame towards you to remove it from the monitor.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.