Réparez vos affaires Communauté Boutique

Sylvania SDVD9004 Motherboard Replacement

Introduction

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that involve delicate internal components.

Ce dont vous avez besoin

  1. Sylvania SDVD9004 Motherboard Replacement, Back cover: étape 1, image 1 de 1

    • Remove ten 7mm Phillips #0 screws.

    • Remove four 5mm Phillips #0 screws.

    Modifier

  2. Sylvania SDVD9004 Motherboard Replacement: étape 2, image 1 de 2 Sylvania SDVD9004 Motherboard Replacement: étape 2, image 2 de 2

    • Flip the device over.

    • Lift the top.

    Modifier

  3. Sylvania SDVD9004 Motherboard Replacement: étape 3, image 1 de 1

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Modifier

  5. Sylvania SDVD9004 Motherboard Replacement, CD Drive: étape 4, image 1 de 3 Sylvania SDVD9004 Motherboard Replacement, CD Drive: étape 4, image 2 de 3 Sylvania SDVD9004 Motherboard Replacement, CD Drive: étape 4, image 3 de 3

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Wedge head lightly between drive and bottom of tab.

    • Repeat on both sides.

    • Gently pull out ribbon

    Modifier

  6. Sylvania SDVD9004 Motherboard Replacement: étape 5, image 1 de 1

    • Drive Removal

    • Use Philip's screw driver to remove three 7 mm screws.

    • Rotate counter clockwise to loosen screws.

    Modifier

  7. Sylvania SDVD9004 Motherboard Replacement: étape 6, image 1 de 1

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    • Follow the red and black cables to the motherboard point of attachment.

    • Use a Flat head screwdriver.

    • Place head of driver into the grove of plug and port.

    • Wedge on all sides evenly to work out plug slowly.

    • Remove small and large plugs.

    Modifier

  8. Sylvania SDVD9004 Motherboard Replacement, Motherboard: étape 7, image 1 de 3 Sylvania SDVD9004 Motherboard Replacement, Motherboard: étape 7, image 2 de 3 Sylvania SDVD9004 Motherboard Replacement, Motherboard: étape 7, image 3 de 3

    • Remove Ribbon from Rear Panel

    • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

    Modifier

  9. Sylvania SDVD9004 Motherboard Replacement: étape 8, image 1 de 1

    • Anchor screw removal

    • Use Philip's head screwdriver

    • Place head of driver into screw on mother board.

    • Rotate counter clockwise

    • Remove all four screws

    Modifier

  10. Sylvania SDVD9004 Motherboard Replacement: étape 9, image 1 de 1

    • Lift motherboard to expose battery

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Sarah Henry

Membre depuis le 10/31/16

417 Réputation

4 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

Baylor, Team 5-10, Williams Fall 2016 Membre de l'équipe Baylor, Team 5-10, Williams Fall 2016

BU-WILLIAMS-F16S5G10

2 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 382