Réparez vos affaires Communauté Boutique

TDK Life on Record A33 Speaker Replacement

Introduction

The middle speaker can be taken apart and replaced if needed. A thin tool is required to take off the speaker guard as well as a Phillip's head screwdriver and a soldering iron to remove the speaker. Be careful when soldering the wires in the speaker.

Ce dont vous avez besoin

  1. TDK Life on Record A33 Speaker Replacement, Speaker Guard: étape 1, image 1 de 1

    • Push the nylon or metal spudger in the corner of the speaker guard.

    Modifier

  2. TDK Life on Record A33 Speaker Replacement: étape 2, image 1 de 1

    • Slowly lift the speaker up enough so that you can slide around the speaker guard.

    Modifier

  3. TDK Life on Record A33 Speaker Replacement: étape 3, image 1 de 2 TDK Life on Record A33 Speaker Replacement: étape 3, image 2 de 2

    • Slide the nylon or metal spudger all around the speaker guard.

    Modifier

  5. TDK Life on Record A33 Speaker Replacement: étape 4, image 1 de 1

    • Remove the speaker guard. You can now replace the speaker guard on your TDK Life on Record A33.

    Modifier

  6. TDK Life on Record A33 Speaker Replacement, Speaker: étape 5, image 1 de 2 TDK Life on Record A33 Speaker Replacement, Speaker: étape 5, image 2 de 2

    • Remove all (4) 3mm screws in the middle speaker using a Phillip's head screwdriver.

    • You can also remove the speakers on the left and right.

    Modifier

  7. TDK Life on Record A33 Speaker Replacement: étape 6, image 1 de 2 TDK Life on Record A33 Speaker Replacement: étape 6, image 2 de 2

    • Do not rip the wires inside the speaker when trying to open the middle speaker on the device.

    • Create an opening in the speaker by holding the device up and carefully grabbing the side of the speaker that pops out.

    Modifier

  8. TDK Life on Record A33 Speaker Replacement: étape 7, image 1 de 2 TDK Life on Record A33 Speaker Replacement: étape 7, image 2 de 2

    • Wear safety goggles and have something to absorb the smoke from the soldering iron just in case.

    • Do not burn the wires of the speaker.

    • Remove the solder that connects the wires to the speaker. You should be able to now remove the speaker and replace it.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Matthew Phou

Membre depuis le 10/20/15

448 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

UMass Dartmouth, Team 4-2, Catania Fall 2015 Membre de l'équipe UMass Dartmouth, Team 4-2, Catania Fall 2015

UMASSD-CATANIA-F15S4G2

4 membres

5 tutoriels rédigés

3 commentaires

Where can I buy the woofer?

stevealvarado54 - Réponse

Really, stevealvarado! What's The point of taking this all apart if you don't have a replacement to put in?

Van Moon - Réponse

If l need a second opinion about which speaker is blown, who or where can can l get it diagnosed?

Tony - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 16

Total : 4,360